The OTG HH-1 emergency lighting is the fixture in our range that is most valued by architects and designers for its sleek design. The fixture has 16 SMD LED lights. This fixtures is the recessed version of the OTG-FF-6. Thanks to springs on both sides of the fixture it can easily be placed in a suspended ceiling. The fixture comes with 4 icons with the following directions: left, right, up and down. We also offer the battery pack in this fixture as a separate product, in case you would like to replace your current battery in the future.
The fixture includes a test button with which you can easily check whether the battery is functioning. The LED emergency light can be mounted above doors, windows and on walls. When consulting a specialist, you can decide how many emergency lighting points you need and how you can mount them.
The fixtures can be set to a continuous mode (permanent lighting), or an emergency mode (non-permanent or non-continuous emergency lighting). When the fixture is set to the continuous mode, the light will be on even when there is no power failure. When the fixture is set to the emergency mode, the light will turn on when the fixture is not receiving power from the mains and it will stay on for at least 3 hours. Three hours is usually sufficient for employees and visitors to leave the building and also falls within the legal standard.
All our emergency light models are CE approved and comply with the standards and requirements that apply in Europe. The housing and diffuser are made of high quality synthetic.
